Stainless steel smelting process and development
my country has become a big country in the consumption and production of stainless steel, and the production of stainless steel needs to be organized according to different varieties and types of raw materials. At present, the development direction of my country's stainless steel production is to improve quality, reduce costs, save energy and reduce emissions, and at the same time, continue to optimize the matching of raw materials and technical equipment. In this paper, several typical smelting processes of stainless steel are compared and analyzed.
Due to its excellent corrosion resistance and excellent comprehensive properties, stainless steel is increasingly widely used in various industrial and civil fields. my country's stainless steel production started late, and ended in 2000 when it hovered at 300,000 tons for a long time, showing a trend of leaping and leaping rapid development. In 2017, the global output of crude stainless steel was 48.08 million tons, and China's stainless steel output reached 25.7737 million tons, accounting for 54% of the global output. With the increase of production capacity, how to improve the market competitiveness of enterprises by optimizing the technological process and reducing the cost of raw materials is imminent.
1. Development of stainless steel smelting
At the beginning of the 20th century, Sheffield, England, successfully smelted and cast the first commercial grade stainless steel, and stainless steel entered people's attention since then. By the 1940s, American Hilty (D.C.Hilty), through the study of Cr-C temperature balance, proposed the theory of decarburization and chromium retention under high temperature conditions, which laid the theoretical foundation of stainless steel smelting, and further studied on this basis. The effect of reducing the partial pressure of liquefied carbon on the physicochemical reaction of stainless steel production has led to the advancement of stainless steel smelting technology. By the mid-to-late 1960s, the Edel factory of Witten Company in Germany successfully developed the vacuum method VOD, and the dilution method AOD of the United Carbide Company in the United States, which greatly reduced the cost of stainless steel smelting, improved the production efficiency of stainless steel, and enabled the large-scale production of stainless steel. become possible.
2. Stainless steel smelting equipment
The choice of stainless steel smelting process is related to steel grades and raw materials. These raw materials mainly include: scrap steel, molten iron, chrome ore, nickel ore alloy, etc.
The equipment used in stainless steel smelting is divided into two categories: primary smelting equipment and refining equipment. The primary smelting equipment includes: electric arc furnace (EAF), non-vacuum induction furnace (generally used for small-scale production), submerged arc furnace, converter. Refining equipment mainly includes ladle type refining equipment (VOD, SS-VOD, VOD-PB, etc.), converter type refining equipment (AOD, VODC, VCR, CLU, KCB-S, KOBMS, K-BOP, MRP-L, GOR, etc. ) and RH function expansion refining equipment (RH-OB, RH-KTB, RH-KPB, etc.) three categories.
Generally speaking, when the smelting raw material is scrap steel, the primary smelting equipment adopts the short-flow process of electric arc furnace + refining equipment;
When the raw material is molten iron, the primary refining equipment adopts the process of converter + refining equipment;
When the raw material is scrap steel + molten iron, the primary smelting equipment adopts the process of electric arc furnace + converter + refining equipment;
When the raw material is chrome ore, the primary refining equipment adopts the process of smelting reduction converter + decarburization converter + refining equipment (currently this process is selected by Kawasaki Steel in Japan);
When domestic laterite nickel ore is used as raw material, the primary refining equipment adopts the process of drying kiln + rotary kiln + submerged arc furnace + converter + refining equipment.
3. Stainless steel smelting process path
At present, the smelting process for producing stainless steel is mainly divided into one-step method, two-step method and three-step method.
3.1 One-step smelting process
The early one-step stainless steel smelting process refers to the completion of scrap melting, decarburization, reduction and refining processes in an electric furnace, and the charge is smelted into stainless steel in one step. This one-step smelting production process that only uses electric furnace to smelt stainless steel is gradually eliminated due to long smelting cycle, low operation rate and high production cost. With the continuous development of the off-furnace refining process and the wide application of AOD furnaces, many stainless steel production enterprises currently use some low-phosphorus or dephosphorized molten iron to replace scrap steel, and use molten iron and alloys as raw materials to enter the AOD furnace for stainless steel smelting. New one-step smelting process.
Compared with the earlier one-step smelting process, the new one-step smelting process eliminates the smelting link of the electric furnace in the production process. Its advantages include: first, lower investment; second, lower production costs; consumption, and improve the purity of molten steel; fourth, the scrap ratio is low, which is suitable for the existing scrap market; fifth, it is especially economical for smelting 400 series stainless steel.
However, the new one-step method has certain requirements for raw material conditions and product solutions: First, the phosphorus content of the molten iron in the AOD furnace is required to be less than 0.03%, so the dephosphorization of the molten iron must be added to the smelting process; second, the alloy is used as the raw material in the new one-step method. It is added to the AOD furnace, and the excessive amount of high-carbon alloy added to the AOD furnace will affect the heat balance of the entire smelting process, and is not suitable for stainless steel varieties with complex components and high alloy content.
The new one-step stainless steel production process is currently widely used in the production of 400 series stainless steel. As a developing country, China lacks scrap steel resources and is extremely nickel-poor. In addition, 400 series stainless steel is widely used in daily life and industrial production. These objective conditions make the new one-step stainless steel smelting more and more popular. Many manufacturers use it.
3.2 Two-step smelting process
The two-step process route is EAF→AOD, EAF→VOD (electric arc furnace→VOD vacuum refining furnace). The production capacity of the EAF→AOD process accounts for about 70% of the world's stainless steel production capacity. The EAF furnace is mainly used to melt scrap steel and alloy raw materials to produce stainless steel pre-melt, which is then smelted into qualified stainless steel molten steel in the AOD furnace. .
In the two-step process, if the phosphorus content of the raw materials entering the electric furnace is relatively high, a link of stainless steel pre-melt dephosphorization needs to be added between the electric furnace and the AOD furnace. The most commonly used pre-melt dephosphorization processes are converter dephosphorization and hot metal tank top spray dephosphorization. When the two-step method uses blast furnace molten iron as the main raw material for stainless steel smelting, if the blast furnace phosphorus content is high, it is also necessary to add a dephosphorization link.
The two-step stainless steel smelting process is widely used in the production of various series of stainless steel. 95% stainless steel variety.
However, the two-step method still needs to pay attention to the following three points in terms of medium consumption and variety plan: First, with the progress of the smelting process and the improvement of the operation level in recent years, the consumption of argon and other media in the two-step smelting process has been significantly reduced. However, compared with the one-step method and the three-step method, the consumption of argon and other media is still slightly larger; second, when the AOD furnace decarburizes to the end, the oxygen content in the molten steel is relatively high, and ferrosilicon must be added to reduce the oxygen in the molten steel, so the ferrosilicon consumption The third is that it cannot be used to produce ultra-low carbon and nitrogen stainless steel at present, and the gas content in the steel is relatively high.
3.3 Three-step smelting process
The basic process flow of the three-step method is: primary smelting furnace → double blowing converter/AOD furnace → vacuum refining device. The three-step method is an advanced method for smelting stainless steel, and the product quality is good, which is suitable for professional manufacturers and stainless steel production in joint iron and steel enterprises.
The three-step method of stainless steel adds a step of deep decarburization on the basis of the two-step method. The advantages of its smelting process are: first, the division of labor in each link is clear, the production rhythm is fast, and the operation is optimized; The content of oxygen and inclusions is low, and the range of products that can be produced is wide; the third is that molten iron can be used for smelting, the requirements for raw materials are not high, and the selection of raw materials is flexible.
However, the three-step stainless steel smelting process realizes the metallurgical function step by step, which will have the following impacts on the production investment: first, the process links are increased, and the investment and production costs are relatively high; second, the vacuum equipment system is complex and the maintenance amount is large.
At present, the smelting process for producing stainless steel in the world mainly adopts the two-step method and the three-step method. Among them, the two-step method of EAF+AOD or EAF+VOD is the most widely used, accounting for about 70%, and the three-step method accounts for about 20%. As low-phosphorus molten iron is widely used in stainless steel production, the new one-step stainless steel smelting process is also adopted by more and more stainless steel production enterprises. In order to adapt to the fierce competition in the stainless steel market, improve product quality and reduce production costs, various enterprises in my country choose appropriate stainless steel smelting processes according to their actual conditions.
4. Selection of smelting process route for domestic stainless steel production enterprises
The determination of the stainless steel smelting process route should first take the product outline as the starting point, and select the appropriate stainless steel smelting process route based on the raw material composition of stainless steel smelting and the stainless steel refining mechanism. Factors such as raw material conditions, production scale, product plans, operating costs and workers' operating habits of stainless steel production enterprises will affect the choice of stainless steel smelting production process. Since factors such as raw materials, operating costs and product plans are greatly affected by market fluctuations, the selection of production processes in modern stainless steel smelting workshops should have certain flexibility, and the production processes and product plans can be adjusted according to market conditions.
Most of China's large-scale stainless steel production enterprises are integrated steel enterprises, such as Taiyuan Iron and Steel Co., Ltd., Jiuzhou Iron and Steel Co., Ltd., which produce both stainless steel and carbon steel. For these combined iron and steel enterprises, the configuration of process equipment can meet the requirements of diversified process routes and different ratios of raw materials. The range of raw materials is relatively wide. There are sufficient molten iron supply and scrap steel that can meet the needs. The best raw materials can be selected. Matching plan. These enterprises have greater flexibility in the selection of stainless steel smelting process routes.
Due to the lack of stainless steel scrap resources in China, the high cost of ingredients in the stainless steel smelting process that uses scrap as the main raw material, coupled with the high energy consumption of all scrap smelting, and the poor quality of scrap that brings many harmful elements into molten steel, more and more stainless steel production in China Enterprises tend to use dephosphorized blast furnace molten iron to smelt stainless steel. Especially in the iron and steel complex enterprises, the use of the blast furnace of the carbon steel system to supply part of the molten iron to the stainless steel smelting system can effectively reduce the cost of raw materials per ton of steel. At the same time, dephosphorization treatment facilities are widely used in stainless steel production processes. The application of dephosphorization treatment facilities can not only reduce the requirements for raw materials in stainless steel production, but also reduce production costs, so that blast furnace molten iron, ordinary scrap steel, high phosphorus pig iron and high phosphorus alloys can be used in large quantities in the production of stainless steel.






