Precious metal electronic paste
Product Properties:
Grade | MANA-PT-7840 Platinum electronic paste | |||||
Condition | Paste | |||||
Appearance | Black with uniform color | |||||
Solid content | 80±1% | |||||
Application | Sensor electronic preparation. | |||||
Fineness | ≤15μm | |||||
Viscosity | 60-80Pa.s | |||||
Sheet Resistance（mΩ/□） | 20 ± 5 | |||||
Recommended Using Process:
1. Printing process: 300 mesh nylon or stainless steel screen (lay flat for 3 minutes after printing).
2. Drying temperature: infrared lamp or 150 ℃ oven.
3. Sintering temperature: 850~1200 ℃ (peak holding time 10 minutes, cycle 45~60 minutes).
Matters Needing Attention:
1. Safe use: If the slurry is swallowed, inhaled or contacted with the skin, it is harmful, so it should be thoroughly cleaned immediately after use. Avoid contact with eyes, skin or clothing, and do not get close to kindling or combustibles. Because it is flammable, it should be tightly covered when not in use, to avoid inhalation of volatile gas, and it should be ventilated when using.
2. This paste does not need to be diluted. If it needs to be diluted, please use the special thinner of our company. The amount of added thinner should not exceed 5% (weight). Too much thinner will directly affect the performance of conductive silver paste.
3. The thickness of the printed line itself shall not be less than 4 μ m. Otherwise, the conductivity is unstable.
Hot Tags: sensor platinum paste, China, suppliers, factory, customized, price, cheap, for coating, for 3D printing, Silver Paste for Varistors, Silver Conductor Paste For Thick Film Circuits
